The Powerjet^®

Standard Features

THERMAL GUARD ENERGY SAVING SYSTEM

The Auto Fill System (AFS) allows the Water Eater to operate in a continuous and unattended mode as long as a feed source of water is available and the solids or concentration level does not create an overheat condition. The system operates as follows:

SOLUTION SAVER FLUID MANAGEMENT SYSTEM

The POWERJET comes with many features that keep your wash solution clean and prolongs the useful life of the solution. First, there is the 100% full flow filtration. Since your parts are only as clean as your was solution, we have an economical, reusable bag filter system. Among the advantage are the prevention of fouling cleaned parts, the elimination of manifold jet clogging, and dramatically extended solution life.

OVERHEAD TURNTABLE DRIVE SYSTEM

The Powerjet uses an overhead drive system for the wash turntable. The impedance protected gear motor and bearing are located out of the solution. This eliminates the need for drive wheels used by many manufacturers that require routine replacement. And the suspended turntable is able to support weights with less strain and wear. The EMC turntables rotate smoothly no matter where the load is located.

EASY RACK UNIVERSAL FIXTURING SYSTEM

Provides limitless parts loading combinations. Quickly position and grip virtually any part for optimum nesting and cleaning exposure. Often rivaling conveyor washers in capacity, the Powerjet with it's multi level loading capabilities outputs many more parts than a traditional washer.

HEAVY DUTY CONSTRUCTION

Everything about the Powerjet is designed with the goal of providing a long lasting and minimal maintenance washer. Twelve gauge mig welded tank with 16 gauge exterior painted insulated tank, 120 gpm heavy duty pump, 13.5 kilowatt heating system, 8" door hinges, 2" full ported ball valve drain and 2" full ported oil skimmer outlet, heavy box tubing door frame, etc.

LOW WATER SHUTDOWN SYSTEM

All EMC Powerjet Automatic Parts Washers have a low water shutdown system to protect the heater system from a low water condition that can burn out the heaters.

7 DAY HEATING SYSTEM TIMER

All EMC Powerjet washers come with a 7 Day Heating System timer. Enables the washer to turn on or off unattended. Allows the machine to be hot when you arrive in the morning and shutdown at closing time.

HIGH VOLUME PUMP & MANIFOLD SYSTEM

Our high volume pump coupled with our straight stream manifold system quickly cleans your parts with minimal downtime for nozzle cleanout or pump repair. The 120 GPM pump flood washes your parts under low pressure. Low pressure drastically reduce maintenance time on pumps, motors, and spray jets. See our Product Information Bulletin - Spray Jets & Automatic Parts Washers.

13.5 KW HEATING SYSTEM

When you want to use your parts washer, you normally want to use it NOW! Our 13.5 kilowatt heating system quickly heats up the solution to operating temperature.

OFF THE SHELF COMPONENTS

There's nothing we hate more than buying equipment with lots of proprietary parts. Not only are the parts usually expensive, they can sometimes take months to procure. All of our components such as contactors, motors, switches, heaters, are easily available through local industrial supply companies such as W.W. Grainger's or McMaster-Carr and we are more than happy to supply you with the part numbers.

PROVEN DESIGN

We've built thousands of parts washers over the last 20 years, always sticking to our philosophy of building quality, production style machines. We've made a few improvements and modifications over the years, of course, but you can be sure that the model you purchase from us has been field tested and proven in a variety of applications and for many years.